Clear the area where you’re going to install the product. Remove any existing leaks, tears or blemishes and take measures.
Adapt each mat to size
Drive the nails on the top of the wall to help support the mat
Place the mat and hammer the rest of the nails between spaces.
Clear the area where you’re going to install the product. Remove any existing leaks, tears or blemishes and take measures.
Adapt each mat to size
Place the mat on top of the wall
Adjust it with tie wraps till it stands firm.
To install over flat floor
Take measures to the whole area and make the plan.
Make straight cuts to the edges of the mat
Extend each mat over the surface
Verify that the separation between mats is less than 0,5 cm
Place auto adhesive tape on the floor, under the mat separation, and carefully remove the plastic protector of the tape.
Take measures to the whole area and make the plan.
Make straight cuts to the edges of the mat
Tear out the existing natural grass
Remove 8 centimeter of the soil, and replace it with chopped stones
Compact the stones
Roll out the mats and join the gaps together
Verify that the separation between mats is less than 0,5 cm.
Line up a straight cut of seam tape under the mats gap and pour the special Instagreen grass glue
Carefully lay down the mat edges to stick the grass onto the floor and wait till dry.
2023 ©Instagreen Florida Corporation All Rights Reserved. Privacy Policy
