INSTALLATION PROCESS
Instagreen products are so easy to install. We can help you with installation or, if you prefer going “DIY” we’ll give you some recommendations.
for instagreen foliage
STEP 1 :
Clear the area where you’re going to install the product. Remove any existing leaks, tears or blemishes and take measures.
STEP 2:
Adapt each mat to size
STEP 3:
Drive the nails on the top of the wall to help support the mat
STEP 4
Place the mat and hammer the rest of the nails between spaces.
For metallic mesh wall
STEP 1 :
Clear the area where you’re going to install the product. Remove any existing leaks, tears or blemishes and take measures.
STEP 2:
Adapt each mat to size
STEP 3:
Place the mat on top of the wall
STEP 4
Adjust it with tie wraps till it stands firm.
For instagreen grass
To install over flat floor
STEP 1 :
Take measures to the whole area and make the plan.
STEP 2:
Make straight cuts to the edges of the mat
STEP 3:
Extend each mat over the surface
STEP 4
Verify that the separation between mats is less than 0,5 cm
STEP 5
Place auto adhesive tape on the floor, under the mat separation, and carefully remove the plastic protector of the tape.
To Install over dirt floor
STEP 1 :
Take measures to the whole area and make the plan.
STEP 2:
Make straight cuts to the edges of the mat
STEP 3:
Tear out the existing natural grass
STEP 4:
Remove 8 centimeter of the soil, and replace it with chopped stones
STEP 5:
Compact the stones
STEP 6:
Roll out the mats and join the gaps together
STEP 7:
Verify that the separation between mats is less than 0,5 cm.
STEP 8:
Line up a straight cut of seam tape under the mats gap and pour the special Instagreen grass glue
STEP 9:
Carefully lay down the mat edges to stick the grass onto the floor and wait till dry.